上一個
下一個
產品中心 Products Center
搜索
全部分類
1/1
瀏覽量:
1000
779094 DIESELPOWER LUBRICITY 25 LTR
瀏覽量:
1000
產品編號
650-779094
數量
-
+
1
產品描述
Product information
This product supersedes product no: 777195
Unitor DieselPower Lubricity has been found to be particularly effective in ultra low sulphur diesel fuels and gas oils that are blended to meet governmental regulations on fuel sulphur content.
Unitor DieselPower Lubricity also provides excellent performance as a lubricity improver component in diesel detergent packages and does not affect the water emulsification tendency of a fuel as measured by ASTMD-1094.
Features
- Improves the lubricity of low sulphur diesel fuels
- Can be used as a stand-alone product or component in diesel packages
- Effective at 50-150 ppm range in meeting the HFRR requirement for lubricity specifications
- Does not interact with the fuel
Benefits
- Protects your engine from wear so you can avoid unscheduled and expensive maintenance
- Quality is ensured so you can rest easy with good engine protection
- You can safely use the product in all types of fuels
Specification
General
| Invent Hazard Material (IMO/EU) classification | C-6 |
|---|
Physical properties
| Appearance | Yellow |
|---|---|
| Density [kg/dm3] | 0,895 |
| Flash Point [°C] | 180 |
| Form | Liquid |
| Materials compatibility | Teflon, Viton , Plasite 10-7122, Plasite 10-9500, Mild Steel, Mild Aluminium, Brass, 304 SS, 316 SS and copper |
| Pour Point [°C] | 6 |
| Solubility | Insoluble in water, soluble with most organic solvents |
Technical data
| Not Compatible | Natural Rubber, Vinyl, Polyethylene, Neoprene, PVC, Hypalon, Buna-N , Polypropylene, Plexiglas, Ethylene, Propylene Rubber and Polyurethane |
|---|
Directions for use
Dosing Method
Preferable application of DieselPower Lubricity is directly into the transfer pump suction to ensure proper mixing. Product may be added to storage or blending tanks with adequate mixing. Dosage of DieselPower Lubricity may vary depending on the fuel quality.
Best dosing and storage temperature : 20 °C (68 ° F) - 40 °C (104 °F)
Sampling and Testing
DieselPower Lubricity also provides excellent performance as a lubricity improver component in diesel detergent packages and does not affect the water emulsification tendency of a fuel as measured by ASTMD-1094.
Dosing and Control
The normal dosage of DieselPower Lubricity is between 100 and 200 ppm (100 to 200 mls per m3 fuel). Independent testing has shown that an application of around 125ppm can improve the HFRR wear scar performance of ULSD to below the specification level of 460um. DieselPower Lubricity may be blended with other components into diesel detergent packages for ultra low sulphur diesel fuel and has no known adverse interaction with common components such as detergents, pour point improvers, cetane improvers or antifoams.
產品特性
• 改善低硫柴油的潤滑性
• 可用作柴油包裝中的獨立產品或組件
• 有效在50-150 ppm範圍內 ，符合HFRR潤滑性規格要求
• 不與燃料相互作用
優勢
• 保護您的發動機免受磨損 ，以避免計劃外和昂貴的維護
• 確保質量 ，因此您可以通過良好的發動機保護降低工作負擔
• 您可以安全地將產品用於所有類型的燃料
Unitor DieselPower Lubricity 已被發現在超低硫柴油燃料和瓦斯油中特別有效 ，這些燃料和瓦斯油經過混合以符合政府關於燃料硫含量的規定 。
Unitor DieselPower Lubricity 還提供優異的耐久性作為柴油清洗劑包裝中的潤滑性改進劑 ，並且不影響燃料的水乳化傾向 ，如ASTMD-1094所測量 。
訂購信息
Product Number Product name
777195 DIESELPOWER LUBRICITY 25 LTR
使用說明
加藥方法
DieselPower Lubricity的優先應用是直接進入輸送泵吸入 ，以確保正確混合 。可以在充分混合的情況下將產品添加到儲存罐或混合罐中 。柴油動力潤滑劑的劑量可能因燃料質量而異 。
采樣和測試
DieselPower Lubricity還提供優異的每種形狀作為柴油清洗劑包裝中的潤滑性改進劑組分 ，並且不影響燃料的水乳化傾向 ，如A S TMD - 1 0 9 4 所測量 。
劑量和控製
DieselPower Lubricity的正常劑量介於100和200ppm（每m3燃料100至200毫升） 。兩者之間 ，獨立測試表明 ，大約125ppm的應用可以將ULSD的HFRR磨損疤痕的耐久性提高到低於460um的規格水平 。柴油動力潤滑劑可以與其他組分混合成柴油清洗劑包 ，用於超低硫柴油燃料 ，並且與清洗劑 ，傾點改進劑 ，十六烷值改進劑或消泡劑等常用組分沒有已知的不良相互作用 。.
版權所有 ：江蘇亞美國際貿易有限公司 備案號 ：蘇ICP備17042192號-1 網站建設 ：